By mahamlodhi
Magnet fishing can be enjoyable for many people. Some upload videos and post their finds from the bottom of seas, lakes, rivers, and even oceans on their websites and social media accounts. People are finding strange things, including coins, bicycles, and many more.
If you’re set on doing this, it might be time to look for the best gear to bring with you. This involves a lot of time and patience, so you should not give up when you don’t have that excellent find on your first few times.
It’s best if you could go fishing with a grappling hook to make it easier for you to retrieve various objects from the water. You can find a grappling hook in the link provided, and this is particularly helpful if a treasure is too heavy for a neodymium magnet. This is not an accessory explicitly made for magnet fishing, but it does the job pretty well. However, you’ll want to make sure that you’re buying the right items before going on your angling trip.
Other things that you might need to bring with you are a powerful neodymium magnet, gear, and some patience. Here’s a more in-depth look at all of them.
Always Bring a Powerful Magnet with You
One of the primary differences between an ordinary household magnet and the fishing variety is the pulling force they have. The ordinary ones that are often displayed on your fridge can be pried apart with a small amount of force. However, with a neodymium variety, you need more than a hundred pounds of pulling force before you can pry it apart.
Go with the ones that have at least 500 pounds of pulling force. If you have found 1,000 pulling force at your local shop, then go for it. You might be thinking that you don’t have a truck to pull a thousand-pound treasure from the bottom of a freshwater lake. However, there’s a small chance that you can find something this heavy thrown away.
Overall, the whole point of getting a 1000-pound magnet rating is that the material will be flat against the surface of the metal that you’re trying to get. Get more info about the ratings on this page.
The reality is very different because you’ll usually find these small metals in the water to be at an angle. You won’t get them at a flat angle, and some are covered with a lot of mulch. There are only a few exposed spots that the neodymium can get at. This is why a 1000-pound is essential because this way, you’ll be able to get a lot of pulling force. Even if the metal is at the edge, the magnet will still be able to reach it.
Tough Ropes are a Must
A thousand-pound magnet is a not much good if it’s not coupled with a strong rope and choose something that will not easily break if you’re pulling a treasure that’s at least a hundred pounds in weight.
Select a high-quality rope with high tensile strength. This is a much-needed item that should be able to match the pulling force of the neodymium. If you’re using magnets that have a pulling force of 500 pounds, the rope’s tensile strength should be at 600 at the least.
Ropes should also be static, and this is where they should not stretch that much. It’s better if they don’t stretch at all. An elastic rope won’t be much help when you’re pulling something heavy out of the water. This can also lead to accidents, especially when the item suddenly comes free.
Check for the proper length and go for at least 60 feet. If possible, choose a hundred feet so you could go fishing from a high pedestrian bridge that’s on top of deep rivers.
The Carabiners should Match
Lots of ropes may come with carabiners, and they should be tough. Carabiners may be useless if the tensile strength of the rope is 600 pounds. However, they are helpful if you’re trying to pull a hundred-pound safe out of the water.
Carabiners should be made from stainless steel for a more waterproof quality. They should be very thick so you can be assured that they won’t fail you. More about carabiners in this link: https://en.wikipedia.org/wiki/Carabiner.
Bring Threadlockers
The magnets often come with various handy eyebolts where you can attach the ropes and carabiners. If there’s a secure attachment to the eyebolt, you should ensure that the eyebolt doesn’t become loose from the magnet’s countersunk hole.
Looseness may quite happen very often, and when it does, you may end up losing the magnet at the bottom of the riverbed. You should secure the countersunk hole to the eyebolt with the help of a thread locker, and this will act like the glue that will give you the security to your eyebolt in the first place.
Watch videos on how the eyebolt works, and you may be required to put in at least a few drops of liquid glue that will set and harden. Threadlockers usually need at least 24 hours to set so you can be assured that the eyebolt will stay in place.
Wear Gloves
Many of the ropes advertised online are usually safe enough to use with your bare hands. However, it’s still recommended to use gloves for additional safety. The gloves will be an added layer of protection against burns, and the right ones will offer you a better grip when you’re starting to pull the metal in. This should also have waterproof features, so you’ll be able to clean it off quickly, especially if you’re doing a lot of hauling.
Two Magnets Might Be Better
Some may prefer single-sided magnets, while others may need two-sided ones when it comes to fishing. Double-sided ones can detect metals better than single-sided ones. They have an eyebolt attached to their rims, and they are usually in the shape of a disk.
The main problem is that the double-sided magnet’s pulling force is greatly reduced. Single-sided magnets may have a pulling force of over 1,100 pounds, while double-sided ones have a max of 800 pounds. You may want to use the double-sided for detecting and the single-sided for pulling.
Read Also:
