Your car windows are essential when driving. They allow you to see other vehicles and hazards, ensuring you react in time and potentially save lives. That’s why you must know how to clean your windows properly, without leaving streaks. And the most critical factor is how to maintain clean car windows.
A scratch and water marks-free glass is the only thing that makes your car look ravishing. Is cleaning possible without taking any professional help? Yes, it is possible. Read through the end for better guidance.
6 Tips To Clean Car Windows
It doesn’t matter if you are thinking about tinting your windows or doing anything else to them. The law requires you to be able to see where you are going.
Here are the six easy tips for keeping clean car windows without leaving any streaks.
1. Understanding The Window
Before you start cleaning, you should note that the window, whether manual or electric, is sat on window regulators. These, in conjunction with a winder or an electric motor, guide your windows up and down.
If you keep getting grease marks on your windows, cleaning may not be the answer. You may need to have a professional check, clean, and possibly even replace your regulators in clean car windows.
2. Avoid Sunlight
Sunlight is your worst enemy when washing a car or its windows. The sunlight dries the window too quickly and will cause streaks. To avoid this, make sure you never wash the windows in direct sunlight to prevent.
To maintain clean car windows after the wash, wipe your glasses with non-scratch fibers. This process makes the glass scratch-free.
3. Use Microfiber Cloths
Microfiber cloths are designed to attract dust and debris, making the cleaning process easier. In fact, the microfiber cloth is essential if you want to avoid streaks on your window afterward.
Microfiber cloths keep your windows scratch-free. And for clean car windows, wipe the glass till it is semi-dry. These wipes keep your glasses scratch-free.
4. Use Two Cloths
If you are after a streak-free finish, then you are going to need to carefully dry and clean car windows. That means you need two clothes, one to wash with and the other to dry with. Again, microfiber cloths are best. This approach ensures the windows are dry, making it much harder to get a streak.
Don’t forget you are less likely to get a streak if you use a circular motion when drying, not the up and down motion.
5. Start At The Passenger Seat
When cleaning your windscreen, you need to start and do most of the work from the passenger seat. There is less in your way, making the job much easier. You can work your way methodically across to ensure the entire window is clean before you dry it.
First, know the materials of your passenger’s seat. Then only follow the cleaning steps for clean car windows. Hence when you know the exact cleaning process for the materials, you can easily eliminate the dirt from the set cover.
6. Use Vinegar
White vinegar in a little warm water is one of the most effective ways of getting your car windows clean. It is also very easy to wipe off and leaves no streaks behind. All you have to do is create a 50/50 mix of vinegar and water and wipe your windows down from the top.
You can then use a standard squeegee to wipe the windows down. They will be left gleaming and without streaks.
Note: warm water is okay, but hot water is not. Using hot water creates condensation, which will ruin your cleaning efforts before completing the process to clean car windows.
These Processes Do Not Go To Damage Your Windows
None of the above steps will cause damage to your windows. However, if you notice any cracks or chips while cleaning your windows, you should get them checked out straight away. A break can quickly get worse and leave you without clean car windows. Then it won’t matter if it has streaks or not!